Material Processing

Laser solutions for Material Processing

Lasers for metal processing. Laser technology in Material Processing is based on High-power Lasers that generate intense light beams to transform different type of materials in fabrication. This can include laser welding, laser drilling, laser metal cutting, laser engraving or cleaning different materials as plastics, wood and metals.


Technical parameters Laser Technology for Material Processing


BPP: 0.3 – 5
Power: 10 – 100 W
Wavelength: NIR

Metal welding

BPP: 1 – 40
Power: 1 – 10 kW (thick sheets need more power)
Wavelength: NIR (blue for Cu [red-metals])

Plastic welding

BPP: 30 – 300 (sometimes ~ 10)
Power: 10 – 200 W
Technology shifts from 1 µm to 2 µm wavelength


BPP: 10 – 80 (soldering) 30 – 500 (brazing)
Power: 10 – 100 W (soldering) 300 W – 8 kW (brazing)
Wavelength: NIR


BPP: 30 – 300
Power: 1 – 10 kW
Wavelength: NIR (blue for Cu [red-metals])


BPP: 2 – 10
Power: 10 W – 10 kW (high power for metals)
Wavelength: NIR


BPP: 50 – 1000
Power: 2 – 20 kW
Wavelength: NIR

Laser Cleaning

Rep.rate.: 10 – 20 kHz
Power: 100 – 1600 W
Wavelength: 1064 nm
Pulse width: < 100 ns

Related Products

Discover our lasers for Material Processing Applications. We also provide laser solutions to customer specific needs. Fill out the form below for more information.

Single Laser Bars

Single Laser Bars

High power single laser bar mounts, conduction or water cooled operating in both continuous wave (CW) and quasi-continuous wave (QCW) mode.
Vertical Diode Laser Stacks

Vertical Diode Laser Stacks

High power vertical diode laser stacks, conduction or water cooled, operating both in continuous wave (CW) and quasi-continuous wave (QCW) mode.
Horizontal Diode Laser Stacks

Horizontal Diode Laser Stacks

High power conduction or water-cooled horizontal diode laser stacks and linear operating in both continuous wave (CW) and quasi-continuous wave (QCW) mode.
High Energy Solid State Lasers

High Energy Solid State Lasers

High energy solid-state laser solutions using Nd:YAG or Nd:YLF as active mediums. Unprecedented laser properties in IR, green and UV
Diode-Pumped Solid State Lasers

Diode-Pumped Solid State Lasers

Diode-pumped solid-state lasers with low cooling requirements and excellent beam quality including MOPA and MULTIPATH laser systems
MET Series

MET Series

Horizontal arrays of edge-emitting laser diodes for thermal-assisted laser processing of metal, steel and high-strength steel.

What are your application needs?

Please fill out the form bellow to request more information. We will answer you shortly.

    Attach files | 2Mb max per file | Pdf - Doc - Jpg

    * Required fields

    In accordance with data protection regulations, we provide , you with the following processing information:
    Data controller: MONOCROM SL
    Purposes of the processing: maintaining a commercial relationship and sending communications of products or services
    Related rights: access, rectification, portability, erasure, limitation and objection
    More processing information in the Privacy Policy.
    I accept the processing of my data for the purpose of sending products or services communications.