HiEN PULS X5400-YAG
HiEN PULS X5400-YAG
High energy pulsed solid state laser solution for material processing, LIBS/RAMAN/IR Spectroscopy, OPO/DYE/Ti: Sa optical pumping, LiDAR & wind LiDAR
- High pulse energies up to 1 J or more
- Short warm up time of less than 2 min
- Up to forth harmonics available
Technical specifications
| Laser parameters | |||||
| HiEN-15400 | HiEN-25400 | HiEN-35400 | HiEN-45400 | HiEN-55400 | |
|---|---|---|---|---|---|
| Fundamental wavelength(1) | 1064 nm | ||||
| Linewidth | < 100 pm | ||||
| Repetition rate | 1 – 500 Hz | ||||
| Energy output at 1064 nm(2) | < 100 mJ | < 250 mJ | < 500 mJ | < 750 mJ | < 1000 mJ |
| Energy output at 532 nm | < 60 mJ | < 150 mJ | < 300 mJ | < 375 mJ | < 600 mJ |
| Energy output at 355 nm | < 35 mJ | < 85 mJ | < 175 mJ | < 260 mJ | < 360 mJ |
| Pulse width | 4 – 25 ns | ||||
| Power stability | < 1% @ 8 h | < 1.5% @ 8 h | < 2% @ 8 h | < 1% @ 8 h | < 1.5% @ 8 h |
| Pulse to pulse stability | < 5% rms | ||||
| Beam parameters | |||||
| Divergence | > 5 mrad | > 6 mrad | > 7 mrad | > 7 mrad | > 7 mrad |
| Beam quality M2 | > 3 | > 5 | > 7 | > 7 | > 7 |
| Beam diameter | 6 mm | ||||
| Beam ellipticity | > 95% | ||||
| Pointing stability | 50 µrad | ||||
| Polarization ratio | 100:1 | ||||
| Jitter | < 1.5 ns | ||||
| Operating parameters | |||||
| Diode life-time(3) | > 109 | ||||
| Coolant flow | < 1.5 l/min | < 3.0 l/min | < 4.5 l/min | < 6.0 l/min | < 7.5 l/min |
| Coolant pressure | < 3.5 bar | ||||
| Coolant | 90% Distilled water + 10% ethylene glycol | ||||
| Warm up time | < 2 min | ||||
| Operating temperature | 20 – 35 deg | ||||
| Additional parameters | |||||
| Weight (laser head) | < 30 Kg | ||||
| Weight (electronics) | < 10 Kg | ||||
| Laser head dimensions (L x W x H) | 600 mm 300 mm 150 mm | 600 mm 450 mm 150 mm | 900 mm 450 mm 150 mm | 1000 mm 450 mm 150 mm | 1100 mm 450 mm 150 mm |
| Communications | RS232 / USB | ||||
| External trigger | IN / OUT | ||||
| Laser class product (EN-60825) | 4 | ||||
1. Per pulse
2. Specifications at 25º C, at the beginning of the lifetime
3. Cooling adaptation are available Reduced life time if use in conflict to the nominal operational conditions
This content cannot be seen on mobile view. Change to PC or tablet landscape view.
Level of integration
Possible levels of integration for this product are marked in red
LI1
DIRECT DIODE
LI2
DIRECT DIODE
MICRO-OPTICS
LI3
SUB-ASSEMBLIES
MICRO-OPTICS
HOUSING
PRISM
CRISTALS
LI4
LASER SYSTEMS
MICRO-OPTICS
HOUSING
PRISM
CRISTALS
ELECTRONIC COMPONENTS
FIBER OUTPUT
We provide our laser solutions with different level of integration, from direct beam to complex systems
Applications
Imaging |
Laser-based illumination sources for 3D Scanning, Radiography Imaging, CTP, Particle Image Velocimetry (PIV) and Pattern Projection More info |
Material Processing |
High power lasers for use in material manufacturing as Welding, Drilling, Cutting, Cladding, Engraving or Cleaning More info |
Light Detecting and Ranging (LiDAR) |
Laser technology based on single emitters, direct diode sources and high energy solid-state lasers for light detecting and raging applications More info |
Security and Target Acquisition |
Diode lasers in low and high power for laser guidance, laser sight, target designation, ranging and defensive countermeasures More info |
Your Custom Laser
We develop your laser solutions, to your needs. Fill in the form to define your desired parameters.